Fatboy completed

Fatboy-1 : SPRacing F3 Flight controller with Betaflight 3.2.4 (Jan 2018) + DYS Aria32 35Amp Escs + Emax MT2208II 2000kv motors+ Gemfan 7" props + Geprc lcsf Pdb+Flyski ia6b receiver.


FATBOY TEST FLIGHT

Racer-275 completed

Completed Racer275, Runcam 2 carrying rig on 6in triprops.

RACER275 : Hglrc Flame F4 with BF3.2.4, Sprot 2205 2300kv motors, Hglrc BLHeli_S 28amp esc, Flysky X6b receiver, Idealfly 6048 6" triprops.

Racer 275 with the Runcam 2.

Real-250 completed

Puda-240 completed

Kermit-2 completed

Kermit-2 is part of a fleet of smaller self cut carbon top and bottom plates using stock arms. In this particular case I used a set of 260mm carbon arms for a total of NOK130. Holding it together are three pieces from a 1mm carbon sheet.

Build-one, Garila-250, Amax-260 and Kermit-1 are part of this smaller size self cut fleet. Bigboy-1, Bigboy-2 and Fatboy are their larger brothers with 8in Stamina arms making them 300+ size for long distance.

260mm arms for Kermit-2.

Kermit-2: SPRacing F3 flight controller +Cleanflight 1.2.4+HGLRC 28Amps Esc+ Furibee RS2205 2300Kv+Flysky X6B receiver.

It started as a test to see whether or not u really need a fancy frame for a quadcopter to fly, the answer was obvious. So long as you have all the basic components of a quad and motors and propellers are at a more or less right place, the contraption will fly off the ground. 

Amax-260 was matched with a set of powerful motors, a 4s battery will shoot it up at a slightest push of throttle. After a couple of ceiling hits these  smaller light frames are more suited for 2300kv motors and 3s Li-po.

Bigboy-2 completed

The beautifully crafted purple 2600kv BBB motors capable of 1,6kg thrust finally arrived, last component needed to complete Bigboy-2, a Runcam carrying long distance rig with 8in Stamina arms. At the  moment though it only carries 6in props.

 BBB 2600kv motors capable of 1.6kg thrust.

Bigboy-2 : SPRacing F3 Flight controller with Betaflight 3.2.4 (Jan 2018) + Foxeer 35Amp Escs + BBB 2600kv motors+ 6048 Idealfly props + Geprc lcsf Pdb+Flyski ia6b receiver.

BIGBOY-2 FLIGHT TEST

Eventhough it's a long distance rig, without a capable receiver it wont go further than the rated 300m+ rated Ia6b receiver that it is equipped with. Flying line of sight (LOS) 300m is already more than I can manage at the moment.

Fatboy and Bigboy2

Fatboy : SPRacing F3 Flight Controller, Emax MTII 2208 2000KV motors, DYS Aria 32 35A Escs

Bigboy-2: SPRacing F3 Flight Controller,  BBB 2206 2500KV motors, Foxeer 35A Escs